Heater Relay for Miele G2470 Optima Series Dishwasher - Genuine Schrack
- repair difficulty:hard
- estimated repair time:~ 45 min
this part fits to Miele G2470 Optima Series Dishwasher.choose another model
estimated 2-4 business daysthis part fits to Miele G2470 Optima Series Dishwasher.choose another model
estimated 2-4 business days- appliance
- Miele G2470 Optima Series Dishwasher
- fitment
- verified
- note
- 6002930 / 0419 11 0101 02 relay with a 220-240 vac 50/60 hz coil and matching connector and mounting.
- usage
- type
- item comes with factory markings and brand packaging.
- country of origin
- Austria
- compatible brand
- appliance type
- part type
- condition
- brand new in box
- one genuine schrack relay, reference 6002930
- 220-240VAC, 50/60Hz coil rating
- keyed plug-in connector housing with flat contacts
- plug-in version without the small side screw hole
- not the 12VDC 5870220 relay or EZL517-A / 09053390 assembly
how to make sure it fits?
description
this is a heater relay for selected miele dishwashers. it switches the heating circuit. one genuine schrack relay is supplied, reference 6002930 / 0419 11 01 01 02, with a 220-240VAC, 50/60Hz coil and keyed plug-in connections. this is the plug-in version without the small side screw hole, distinct from the 12VDC 5870220 and EZL517-A / 09053390 versions.
replacing a faulty relay may restore heating when it causes cold wash water. on miele domestic dishwashers, F24 is a heating-relay contact fault requiring service diagnosis.
repair advice
DIY warning
Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.
Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.
i agree, show repair advice
- repair time~ 45 min
- repair difficultyhard
repair time and tools
- Torx/screwdriver set to suit the appliance fasteners
- Towel
- Torch
fitting notes
Similar relay bodies can have different coil voltages
This relay has a 220-240VAC, 50/60Hz coil. A 12VDC relay marked 5870220 / 041911120103 is not a substitute, even when the white housing looks similar. Match the complete label, connector layout and retaining lugs. Do not alter wiring or connectors to make a different version fit.
Not the EZL517-A assembly
Miele also used the larger EZL517-A / 09053390 assembly. This 6002930 relay does not replace it and is not suitable for G4203 SCU or G6100SCU. Keep the full appliance suffix and send model-label and old-relay photos if there is any doubt.
error codes
F24 - Heating relay contact fault (Miele domestic dishwasher support). Miele advises a service appointment for this technical fault. F24 alone neither identifies a failed 6002930 relay nor establishes its fit. Other heating-circuit faults can produce the same symptom; match the original relay version and have the fault diagnosed.
For Professional PG machines, use fault guidance for the exact model; the domestic F24 description may not apply.
Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.
specifications
specifications
- Additional part reference
- 0419 11 01 01 02
- Authenticity
- Genuine - in original packaging
- Body colour
- white
- Coil rating shown
- 220-240VAC, 50/60Hz
- Connections
- keyed plug-in connector housing with flat contacts
- Contact arrangement
- two normally open poles (2NO), shown on relay diagram
- Contact ratings shown
- 16A at 250VAC; 12A at 400VAC
- Function
- switches the dishwasher heating circuit
- Mounting
- moulded retaining lugs and side mounting tab
- Relay marking
- Schrack / TE 0419 11
- Supply
- one relay only
- Version restriction
- not the 12VDC 5870220 relay or EZL517-A / 09053390 assembly
- Part references
- 6002930, 041911010102
- Our catalogue reference
- BOZ1000060
- Repair difficulty
- hard
- Repair time
- ~ 45 min
- SKU
- MIELE_6002930
- EAN
- 9309003709370
- Country of origin
- Austria
- Origin note
- Made by Schrack; the relay carries Schrack / Tyco Electronics markings.
- In the pack
- 1 x heater relay
- Units in pack
- 1
- Shipping weight
- 1 kg
- Dimensions(W × H × L)
- 20 × 20 × 20 cm (packaged)
looking to buy more than 20? use our wholesale rfq form.
product video
feedback
- 5.0/5marketplace
Excellent service and communication.
for Genuine Miele 6002930 Heater Relay | Fix F24 Error (Dishwasher Not Heating)
- 5.0/5marketplace
Thank you for the refund after my erroneous order.
for Genuine Heating Relay for Miele G2470 Optima Series Dishwashers- Free Shipping
- 5.0/5marketplace
Great
for Miele Dishwasher Heater Relay OEM 6002930 | Fixes F24 Heating Error - Made in EU
