Condenser Sponge Filter for Miele TCJ 590 WP 9kg Tumble Dryer
- repair difficulty:easy
- estimated repair time:~ 5 min
this part fits to Miele TCJ 590 WP 9kg Tumble Dryer.choose another model
estimated 2-4 business daysthis part fits to Miele TCJ 590 WP 9kg Tumble Dryer.choose another model
estimated 2-4 business days- appliance
- Miele TCJ 590 WP 9kg Tumble Dryer
- fitment
- verified
- usage
- type
- quality aftermarket replacement, mostly sourced from factories that work with name brands.
- compatible brand
- appliance type
- part type
- condition
- brand new in box
- two washable foam filters; one filter used at a time
- shaped corner with two large holes and one small locating hole
- replaces 12551630 / 9164761 / 09164761
- foam only; existing handle and holder reused, not supplied
how to make sure it fits?
description
this is a two-pack of foam plinth filters for selected miele heat-pump dryers. the foam catches lint before it reaches the heat exchanger. you receive two washable filters, approximately 205 x 153 x 30 mm each, to fit individually in the existing handle and holder. keep a spare while the other dries after cleaning.
replace torn, distorted or persistently blocked foam after cleaning. restricted airflow can lengthen drying times; on applicable miele models, F66 / F 066 can indicate an airflow restriction.
repair advice
DIY warning
Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.
Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.
i agree, show repair advice
- repair time~ 5 min
- repair difficultyeasy
repair time and tools
- No tools normally required. A soft cloth is useful for loose lint.
fitting notes
Use one filter and keep a spare
Fit one foam filter at a time. Reuse the matching handle and holder, and compare the shape and holes before fitting. Switch off and unplug the dryer, then follow the filter-access instructions for your model.
Cleaning and checking the foam
Follow the cleaning prompt and care instructions for your dryer. Rinse the foam gently, squeeze out water carefully and allow it to dry as instructed. Do not refit a dripping-wet filter. Replace foam that is torn, distorted, does not sit snugly or remains blocked after the recommended cleaning.
error codes
F66 / F 066: Miele identifies restricted airflow, including clogged fluff or plinth filters, in the referenced dryer instructions. Clean the filters as instructed and inspect the foam for damage or poor fit. A wet filter or blockage elsewhere can also cause the warning. Replace the foam when its condition calls for it; the code alone does not identify a failed filter. If the warning returns, follow the troubleshooting instructions for your model or seek service advice.
Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.
specifications
specifications
- Approximate size per filter
- 205 x 153 x 30 mm
- Authenticity
- Aftermarket
- Care
- Washable and reusable; follow the dryer manual
- Colour
- Black
- Material
- Foam
- Mounting
- Reuse the matching handle and holder
- Not supplied
- Handle and holder
- Part type
- Plinth / condenser foam filter
- Position
- Lower front plinth access flap
- Shape
- Shaped corner with two large holes and one small locating hole
- Supply
- Two foam filters
- Part references
- 12551630, 9164761, 09164761, 9164762, 12230291, 12230302, 12789630, 12789631
- Our catalogue reference
- BOZ1000111
- Repair difficulty
- easy
- Repair time
- ~ 5 min
- SKU
- 2PACK_FIL350MI_PL
- Country of origin
- China
- Origin note
- Imported from Italy.
- In the pack
- 2 x foam plinth filters. Handle and holder are not included.
- Units in pack
- 2
- Shipping weight
- 1 kg
looking to buy more than 20? use our wholesale rfq form.
feedback
- 5.0/5marketplace
All good thanks
for 2 Pack Dryer Plinth Filters for Miele TCD 660 WP 8 kg 12551630
- 5.0/5marketplace
(｡◕‿◕｡)
for Miele Dryer Lower Filter 12551630 T1 T2 May Help Fix Filter Warnings - Pack of 2
- 5.0/5marketplace
Correct filter for my Meile dryer.
Postage cost a bit too much, was only packaged in plastic auspost bag. The filter is very light, so not a heavy item.
for Miele T1 Dryer Filter fits TCB 140 WP 7kg Tumble Dryer - Clean Out Airways
seller response: Thank you for your positive feecback. I will look into postage costs, currrenlty I apply one size fits all approach. I need to crunch the numbers and make sure it is fair
- 5.0/5marketplace
Great service and ontime. Exactly as described.
for Miele T1 Dryer Filter fits TKG 450 WP 8kg Tumble Dryer
