big oz lebowskispares and components
big oz lebowskispares and components
big oz lebowskispares and components

Flow Meter Reed Switch Assembly for Siemens Dishwashers - 00611317

  • repair difficulty:moderate
  • estimated repair time:~ 30 min
One complete sensor assembly with Big Oz Lebowski packaging; not genuine appliance-brand packaging.
in stock and ready to go
AU $19 | delivery 2-4 days
AU $19
buy now, pay later available
In Stock
fit or refundIf it doesn't fit the model listed in the title or description, we'll offer an instant refund. No questions, no restocking fees.12 month warrantyIf the part fails within 12 months of purchase, we'll send a replacement at no cost. Covers manufacturing defects under normal use.
enter your model number to check compatibility.

loading the full model list

dispatch: next business day from Sydney, NSW
shipping: tracked, Australia Post estimated 2-4 business days
returns: 30-day change-of-mind returns.
payments:
fit or refundIf it doesn't fit the model listed in the title or description, we'll offer an instant refund. No questions, no restocking fees.12 month warrantyIf the part fails within 12 months of purchase, we'll send a replacement at no cost. Covers manufacturing defects under normal use.
enter your model number to check compatibility.

loading the full model list

dispatch: next business day from Sydney, NSW
shipping: tracked, Australia Post estimated 2-4 business days
returns: 30-day change-of-mind returns.
payments:
feedback: 4,365 positive (4,391 total).
AU $19
In Stockposted in 1 business day
usage
household
type
quality aftermarket replacement, mostly sourced from factories that work with name brands.
compatible brand
Siemens
appliance type
dishwashers
part type
sensors and thermostats
part references
0061131761131710016522
condition
brand new in box
  • one complete sensor board and plastic casing
  • replaces 00611317 / 611317 / 10016522
  • large heat exchanger / water inlet chamber not included

how to make sure it fits?

description

this is a flow meter sensor for siemens dishwashers. it detects water entering the dishwasher as it fills. you receive one sensor board with its plastic casing. it replaces part numbers 00611317, 611317 and 10016522.

filling problems or E14 / F14 on applicable siemens models can relate to an inlet-system fault; replace the sensor when it is confirmed as the cause.

compatible models (15)
repair advice

DIY warning

Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.

Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.

i agree, show repair advice
  • repair time~ 30 min
  • repair difficultymoderate

repair time and tools

  • Model-appropriate screwdriver, pliers if the retaining clips require them, torch and towel.

fitting notes

Board and casing supplied together

This is the complete small flow-meter sensor assembly, not the bare reed-switch board and not the large water inlet chamber. Compare the whole old casing and electrical connection as well as the part reference. If you cannot identify the supply you need, send the full appliance label and an old-part photo before ordering. A water-filling error alone does not identify which part has failed.

error codes

E14 / F14: Siemens general support identifies trouble in the filling or inlet system. This does not prove the reed switch is faulty. Follow the instructions for the exact E-Nr.

Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.

think you can improve this? help us

common solutions

how to identify a cased dishwasher flow sensorread more
specifications

specifications

Assembly
Reed-switch sensor board with plastic casing
Authenticity
Aftermarket
Board appearance
Green circuit board with exposed contact tracks
Function
Detects water-flow movement during filling
Housing
Translucent moulded plastic
Matching points
Old part reference, casing shape, mounting and electrical connection
Not included
Large heat exchanger / water inlet chamber
Sensor
Magnetic reed switch on a small circuit board
Supply
One complete sensor assembly
Our catalogue reference
BOZ1000010
Repair difficulty
moderate
Repair time
~ 30 min
SKU
SIEMENS_611317_FULL
EAN
9309003709202
Country of origin
China
In the pack
1 x complete flow meter reed switch assembly: sensor board and plastic casing
Units in pack
1
Shipping weight
0.5 kg
Dimensions(W × H × L)
20 × 20 × 20 cm (packaged)

looking to buy more than 20? use our wholesale rfq form.

feedback

right to repair manifesto

You bought it, you own it, and you should be able to fix it.Australian households deserve access to genuine spare parts,clear part numbers and honest fitment information,without replacing an entire appliancewhen something small breaks.

We do our best to make spare parts easy to find.

  • in stock only: if it is listed it is on our shelf
  • honest labels: if we say genuine it arrives with factory labels and markings
  • we pack and post from Alexandria NSW
  • fit or refund guarantee on most products

need a hand?

got a question about a part or an order? drop us a message and we'll get back to you as soon as we can.

customer service

need a hand?

got a question about a part or an order? drop us a message and we'll get back to you as soon as we can.

customer service