PTFE Grill Sheets for Roband GSA810 & GSA815 Grills - 495 x 740 mm, 10 Pack
- repair difficulty:easy
- estimated repair time:~ 10 min
loading the full model list
estimated 2-4 business daysloading the full model list
estimated 2-4 business days- usage
- type
- quality aftermarket replacement, mostly sourced from factories that work with name brands.
- compatible brand
- appliance type
- part type
- part references
- PGS810
- condition
- brand new in box
- ten reusable black ptfe-coated fibreglass sheets
- 495 x 740 mm per sheet; 0.2 mm thick
- maximum use temperature 260 C / 500 F
- replaces PGS810
- uses the RC8 retainer arrangement; clip not supplied
how to make sure it fits?
description
this is a ten-pack of grill sheets for selected roband 8-slice grill stations. the PTFE-coated fibreglass liners cover the plates to reduce sticking and help clean-down. ten black sheets are supplied, each 495 x 740 mm and 0.2 mm thick, replacing PGS810.
replace worn or damaged liners. the sheets use the existing RC8 retainer arrangement and have a maximum use temperature of 260 C / 500 F.
compatible models (12)
- GSA810Roband GSA810 8-Slice Grill Station
- GSA810RRoband GSA810R 8-Slice Grill Station - Ribbed Top Plate
- GSA810RTRoband GSA810RT 8-Slice Grill Station - Non-Stick Ribbed Top Plate
- GSA810SRoband GSA810S 8-Slice Grill Station - Smooth Plates
- GSA810SERoband GSA810SE 8-Slice Grill Station - Smooth Plates, Electronic Timer
- GSA810STRoband GSA810ST 8-Slice Grill Station - Non-Stick Smooth Plates
- GSA815Roband GSA815 8-Slice Grill Station
- GSA815RRoband GSA815R 8-Slice Grill Station - Ribbed Top Plate
- GSA815RTRoband GSA815RT 8-Slice Grill Station - Non-Stick Ribbed Top Plate
- GSA815SRoband GSA815S 8-Slice Grill Station - Smooth Plates
- GSA815SERoband GSA815SE 8-Slice Grill Station - Smooth Plates, Electronic Timer
- GSA815STRoband GSA815ST 8-Slice Grill Station - Non-Stick Smooth Plates
repair advice
DIY warning
Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.
Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.
i agree, show repair advice
- repair time~ 10 min
- repair difficultyeasy
repair time and tools
- No fitting tools normally required. Tape measure for the size check; soft cloth and mild detergent for cleaning.
fitting notes
Check the 8-slice liner and clip
Match a 495 x 740 mm sheet and the RC8 retainer arrangement. PGS810 identifies the size, not a genuine Roband sheet. The RC8 clip is sold separately. The sheet runs across the open upper and lower plates, with the lower end beneath the grease box; do not compare its full length with just the bottom cooking plate. Change it only with the grill unplugged and cool. If replacing a thinner liner, compare the 0.2 mm thickness and check that the sheet lies flat under the retainer.
Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.
specifications
specifications
- Application
- Indoor commercial contact grill liner
- Authenticity
- Aftermarket
- Care
- Warm soapy water and mild detergent; rinse and air-dry
- Colour
- Black
- Condition
- New
- Material
- PTFE-coated fibreglass
- Maximum use temperature
- 260 C / 500 F
- Pack contents
- 10 sheets
- Replaces part numbers
- PGS810
- Retainer arrangement
- RC8; clip not supplied
- Reusable
- Yes
- Sheet length
- 740 mm
- Sheet thickness
- 0.2 mm (package label)
- Sheet width
- 495 mm
- Our catalogue reference
- BOZ1000087
- Repair difficulty
- easy
- Repair time
- ~ 10 min
- SKU
- ROBAND_ROBANDLARGE
- EAN
- 9309002880902
- Country of origin
- China
- In the pack
- 10 x 495 x 740 mm PTFE grill sheets
- Units in pack
- 10
looking to buy more than 20? use our wholesale rfq form.
feedback
reviews with photos1 photo
- 5.0/5marketplace
I haven’t used yet
for Commercial 10 Pack Non-Stick PTFE Grill Sheets for 8 Slice Roband Grill Station
- 5.0/5marketplace
Great product, super fast shipping. Thank you
for Roband GSA810/815 Compatible PTFE Grill Sheets 495x740mm (PGS810) 10 PK
- 5.0/5marketplace
Excellent service e and product
for Commercial 10 Pack Non-Stick PTFE Grill Sheets for 8 Slice Roband Grill Station
- 5.0/5marketplace
Great product, better than the name brand - cheers!
for Commercial 10 Pack Non-Stick PTFE Grill Sheets for 8 Slice Roband Grill Station
- 5.0/5marketplace
The seller was very helpful and sent the goods in an excellent time frame
for Commercial 10 PK Non-Stick PTFE Grill Sheets for 8 Slice Roband Grill Station
- 5.0/5marketplace
good product
for Commercial 10 Pack Non-Stick PTFE Grill Sheets for 8 Slice Roband Grill Station
- 5.0/5marketplace
Thank you
for Roband GSA810/815 Compatible PTFE Grill Sheets 495x740mm (PGS810) 10 PK
