how to inspect a leaking household or commercial blender jug
if a household or commercial blender jug leaks, unplug the blender and wait for the blades to stop and hot contents to cool before lifting and emptying the jug. inspect visible cracks, lid seating and joints, then clean or reseat only parts the model's manual allows.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 10 min
when to get help
- do not use a jug with cracks, loose or damaged blades, leakage towards the base or a continuing leak at a sealed assembly. contact the manufacturer or service provider before further use; do not run the blender to test a leaking jug.
steps
- unplug and empty the jug
unplug the blender. wait for the blades to stop and any hot contents to cool before lifting off and emptying the jug.
- look for the source of the leak
check for cracks, a lid that is not seated properly and residue around visible joints. keep fingers away from cutting edges and do not turn the blades by hand.
- clean and reseat removable parts
handle only parts your manual allows you to remove. follow its washing and assembly instructions, rather than another jug's collar-release method or sealing-ring position. leave unfamiliar collars and sealed blade bearings closed.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
