how to identify a can-opener blade and drive-wheel kit
a slipping wheel or incomplete cut needs the blade, drive wheel and mounting checked together. 10291-03 supplies a 25 mm wheel, steel blade, wheel-removal tool, two securing screws and fitting instructions, not a complete opener.
the wheel is 8 mm thick and the blade is 42 x 10 x 3 mm.
- repair type
- mechanical repair
- difficulty
- moderate
scope: EZ20 needs the matching blade version and screw positions. avoid sharp edges and stop for a loose bench mount, damaged body or stuck parts. do not bend the blade or force a different version.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- check the old parts
stop using an opener that slips or leaves an unsafe cut. look at the wheel and blade without touching cutting edges. check the exact opener in the compatibility checker and compare the blade shape, mounting holes and 25 mm wheel.
- compare the kit
compare the old parts with the kit dimensions and screw positions. wheel diameter alone is not enough, especially where a model has different blade versions.
- replace as instructed
follow the supplied instructions with the included tool and screws. keep fingers clear of sharp edges. get help if parts are stuck or the mounting is damaged. do not bend the blade or force worn parts to fit.
- check normal opening
check that the parts and bench mounting are secure, then try normal opening on a sound can. stop if the wheel slips or the cut is incomplete. handle the lid and rim carefully; continued slipping needs a mounting or mechanism check.
think you can improve this guide? help us
