why does food keep sticking to my contact-grill sheet?
food sticking after normal cleaning can mean the grill sheet is worn, damaged or not sitting correctly. inspect only after the grill is disconnected and fully cool.
follow the grill manual's cleaning advice; avoid sharp scrapers, abrasive pads and cutting food on the sheet. a clean intact liner that sits correctly does not need automatic replacement.
the linked guide covers matching ptfe-coated fibreglass sheets for selected Roband grills. the six-slice format is 370 x 740 mm with RC6 retention; the eight-slice format is 495 x 740 mm with RC8 retention. these are different choices, not sizes or clips to swap. both products have a 260 C / 500 F maximum use temperature; obey the lower applicable limit from the grill and sheet instructions.
first checks
- inspect the cold liner
check wear, damage and secure flat seating after permitted cleaning, without touching hot plates or forcing retainer clips.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
