how to clean a Roband commercial grill and check its liner
for Roband GSA610, GSA810, GSA815 and SE versions, disconnect and cool the grill before cleaning with non-abrasive equipment. use the liner instructions only for the matching clip-and-grease-box arrangement, without applying another sheet's material or temperature claims.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 15 min
scope: Roband GSA610, GSA810, GSA815 and SE versions. liner fitting applies only to the matching clip-and-grease-box arrangement.
tools and materials
- damp non-abrasive cloth
- nylon cleaning equipment
when to get help
- stop for damaged coating, distorted plates or a clip that will not hold securely, and ask Roband or the service provider for advice. electrical faults need qualified service, not further surface cleaning.
steps
- disconnect and cool
disconnect the grill and let it cool before cleaning. do not put cold water or ice on hot plates.
- remove cooking residue gently
use a damp, non-abrasive cloth with warm soapy water and nylon cleaning equipment. do not use metal scrapers.
- check the matching liner arrangement
only for the matching clip-and-grease-box sheet system, start with clean, cold plates. lay the suitable sheet over the open plates as the fitting diagram shows. rest the matching retainer clip against the lower part of the top plate, slide it upwards to engage the bottom hook, then rotate and press it into place as illustrated. put the sheet end under the grease box and replace the box. stop if the clip will not hold securely; the sheet's own material and temperature limits still apply.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
