how to clean residue from intact ceramic or induction cooktop glass
for intact ceramic or induction cooktop glass, switch off and let the surface cool before using its approved cleaner and a soft cloth. use a purpose-made scraper only where the manual allows it; cracks or lifted coatings are not stains to scrape.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 10 min
scope: intact ceramic and induction glass. use separate manual instructions for specialist coatings and hot sugar spills.
tools and materials
- soft cloth
when to get help
- for a crack, chip, lifted coating or an uncertain surface, stop cleaning and leave the cooktop out of use until assessed. if the glass is cracked, isolate power if safe. do not scrape damage or remove the cooktop.
steps
- start with the approved cleaner
turn the cooktop off and let it cool. check the mark without pressing on it, then use a soft cloth and the cleaner specified for that glass or coating.
- treat stubborn residue gently
use a purpose-made cooktop scraper only if your manual allows it, following its handling instructions. never use a loose razor blade. wipe away cleaner residue and dry the surface.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
