why is my phase 9 Fisher & Paykel DishDrawer showing A3?
A3 means the drawer cannot drain on the documented phase 9 Fisher & Paykel DD60DI9, DD60SI9 and DD60DDFX9 models. a blocked drain path needs checking before considering a rotor replacement.
model scope: Fisher & Paykel phase 9 DD60DI9, DD60SI9 and DD60DDFX9 dishdrawers, subject to the product-code conditions for the matching rotor.
record which drawer is affected and whether water remains after the interrupted wash. check the safely visible outlet hose and drain connection without pulling the appliance out. let the drawer cool, isolate power and follow its own filter-cleaning instructions.
the phase 9 user guide illustrates a circular drain filter; an older kidney-filter procedure is not interchangeable. if drainage remains poor, arrange service. the linked guide describes a rotor-and-seal assessment for a repairer, but A3 alone does not establish that this is the repair needed. do not swap rotors between drawers as a test.
the 524922P rotor set is not universal. the product page's model and product-code conditions still apply, and a sound housing and stator are reused. stop for leaks, sharp debris or a drawer that will not empty.
possible causes
- a blocked or kinked drain path
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
