why does my DishDrawer wash poorly or leave water inside?
poorly washed dishes and retained water are different observations, although the rotor is involved in both washing and draining. start by noting which drawer and which symptom are affected.
disconnect power and let the drawer cool before the manual's owner-care checks. clean accessible filters and check for dishes obstructing the spray arm. do not swap rotors between drawers as a test or touch the stator, wiring or controller.
the linked rotor guide is relevant if a repairer confirms damage, jamming or a seal fault after checking for blockages and other faults. the 524922P set contains a rotor with wash and drain impellers and one o-ring for one drawer; housing and stator are separate. the full product-code letter matters because similar-looking rotors serve different versions. new unusual noise after fitting needs the part and installation rechecked.
first checks
- identify the actual symptom
record weak washing, retained water or new noise separately for each affected drawer, then use only its permitted filter and loading checks.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
