how to check an integrated DishDrawer badge cover
the chrome-finish cover trims the rectangular badge opening on a matching integrated DishDrawer front. 527276 supplies the plastic cover only, even if its original packet says kit.
check that the existing buttons and mounting opening are intact before choosing a cover; missing buttons require a different repair.
- repair type
- mechanical repair
- difficulty
- easy
scope: use only an outside release method documented for the exact panel. do not prise buttons or remove the front to explore the clips. ask a repairer if the release method is unclear.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- switch the drawer off
switch the drawer off. compare the cover outline and opening with the product page and exact integrated-panel instructions. do not prise at buttons or remove the front. missing buttons or a damaged opening need more than a cover.
- release the old cover
use only the documented outside clip-release method. if the front panel must come off or the clips won't release normally, have a repairer do the job.
- fit the new cover
fit it without forcing it or altering the opening. it must sit flush and secure without blocking the existing buttons. stop if it won't seat normally.
think you can improve this guide? help us
