why is water leaking when my dishwasher drains?
water appearing during draining may come from a split outlet hose or a connection, but another leak can leave water nearby too. the first visible location and timing help the repairer trace it.
stop using the dishwasher and turn off the accessible water supply. disconnect power only from a safe, dry position. do not run another cycle to reproduce the leak or pull the appliance out.
the linked guide concerns a grey 230 cm drain hose, not an inlet or water-safety hose. a repairer must locate the leak, compare both hose ends and confirm the required route and full model before fitting it. a leaking connection may need a different repair. both ends must be checked and the appliance must drain without leaking before normal use; water reappearing means stop and seek another check.
first checks
- record safely visible evidence
from a dry position, note already-visible hose damage and whether the water appeared during draining, without moving the appliance.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
