when does a damaged dryer condenser foam filter need replacing?
replace condenser foam that is torn, crumbling or still blocked after the cleaning allowed by the dryer manual. a longer cycle or filter reminder alone does not prove the foam has failed.
check the door lint filter as well as the condenser foam, because restricted airflow can lengthen drying. switch off, unplug and let the dryer cool before the permitted inspection. keep away from sharp heat-exchanger fins and do not run the dryer without its filters.
the linked guide covers replacing foam in an undamaged original support. the H0180300116-compatible offer contains two separate sponges: one fits in the original position and the other is a spare, not a second layer. if the support is damaged or the prompt continues after correct cleaning and refitting, seek model-specific help rather than repeatedly buying foam.
first checks
- inspect after cleaning
follow the exact model's filter-cleaning instructions, then look for tears, crumbling or remaining blockage.
- check the support
confirm the support is sound and the filter and cover can be secured. do not put two replacement sponges in one filter position.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
