how to check airflow around a Simpson vented dryer
on Simpson vented dryers, stop for unusual cabinet heat before checking lint, visible openings and room ventilation. cool and unplug the dryer, keep internal covers closed and use the duct limits specified for the exact model.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 10 min
scope: Simpson vented dryers; exact duct limits come from the model guide.
when to get help
- a burning smell, damaged filter, repeated cut-out or inaccessible lint needs service. red reset buttons exist only on selected models; no universal reset is advised.
steps
- stop for excess heat
if the cabinet is unusually hot, stop using the dryer. if a hot cycle ends early, remove and spread out the clothes promptly if safe. let the dryer cool and unplug it for checks; do not repeatedly reset its cut-out.
- clear the owner-accessible airflow path
clean and refit the lint filter. check the visible intake and exhaust opening for lint, clothing or a curtain blocking airflow. do not remove covers or move a wall-mounted dryer.
- check where the exhaust goes
a closed cupboard can make the dryer re-breathe damp air. use the ventilation arrangement and duct length permitted for your model, and reduce an overloaded load before trying again.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
