how to identify a damaged dryer door-switch cover
keep the dryer off if the door-switch cover is broken or the door will not close normally. a technician needs to check the separate catch and electrical switch before replacing the cover.
8581333761014 is one white plastic cover, about 110 x 30 x 10 mm; neither the switch nor latch is supplied.
- repair type
- technician service
- difficulty
- moderate
scope: inspect only the visible plastic. do not reach through the opening, hold the switch in or bypass the door safety system.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- unplug the dryer
unplug the dryer and let it cool. inspect only the visible cover for cracks or missing plastic. look for trapped clothing, but do not reach through the opening, force the catch, hold the switch or bypass it.
- show the damage
photograph the visible area and compare it with the product photos. check the full model and product number on the product page.
- arrange fitting
have a technician check that the catch and switch are undamaged and fit the cover using the model's access instructions. leave wiring and internal access to them.
- check the door
the cover must be secure and the door must close and latch normally. any remaining starting or closing problem needs service.
think you can improve this guide? help us
