why is my oven fan running without heat in fan mode?
hearing the fan does not prove the fan-forced heating element is working. a failed rear element is possible, but settings or controls may also explain missing heat.
note whether the problem was limited to fan mode and any safety-switch trip. keep the suspect oven off and let it cool; do not remove the rear cavity cover or repeatedly reset a tripping circuit.
the linked guide explains arranging assessment of the round rear 140089339059 element, separate from the fan blade and motor. a qualified repairer must identify the cause, match the full model, product number, mounting and terminals, and perform electrical safety checks. this is not a diy electrical test or a promise that an element will resolve every fan-mode fault. continuing trouble after repair needs further service.
first checks
- record the failed function
use what you already observed about fan mode, other settings and tripping; do not run another suspect heating cycle.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
