why is my oven light not coming on?
some oven functions leave the light off, so check the manual before treating a dark cavity as a failed lamp. if the light should be on, a lamp fault is possible.
do not repeat heating tests. follow the exact model's power-disconnection and cooling instructions before any permitted lamp access, and do not force a stuck cover.
the linked guide concerns a G9 40 W, 220-240 V halogen lamp rated to 300 C. a fitting base alone does not establish suitability: this lamp must not replace one requiring 350 C. check the cavity's full lamp specification, model and revision. use clean gloves or a cloth on halogen glass and refit the protective cover before power is restored. damaged holders, wiring, inaccessible lamps or a correct new lamp that stays dark need service, not higher wattage.
first checks
- check the normal light setting
read the function and lamp requirements in the oven manual without running the suspect oven again.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
