how to identify a matching oven door hinge pair
have the door supports checked before choosing a replacement hinge pair. 031199009930R contains two matching Nardi fixed-joint hinges, about 170 mm long with 142 mm main mounting-hole centres.
the receiving brackets are separate. correct fit and closing alone do not establish that the door is safely supported in its normal open position.
- repair type
- mechanical repair
- difficulty
- moderate
scope: do not lift off the heavy glass door or move loaded hinge arms to investigate. have competent help compare both sides, receivers and mounts and use the exact model's door-support procedure.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- look at the cold door
with the oven off and cold, note uneven gaps or a loose-feeling door. do not lift it off or move the hinge arms to investigate. record the full model from the accessible label and use existing hinge photos only.
- leave the door alone
keep the oven off. do not force or repeatedly move a sagging door, or dismantle it just to find a hinge stamp.
- have the hinges checked
ask a repairer to compare the hinges, receiving brackets and mounting points, and check the compatibility checker. have the right pair fitted with the door supported as the manual directs. keep hands clear of the hinge arms; arrange service beyond the door mounts.
- check the door support
after fitting, the door must sit securely, move smoothly and close squarely. it must also stay safely supported in its normal open position.
think you can improve this guide? help us
