how to check oven shelf position and tray spacing for uneven browning
for uneven oven browning, arrange the shelves while cold using the cooking chart, remove unused trays and leave room around the dish. use the recommended mode and preheating, then compare a bake without unnecessary door opening.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: cooking setup only, not thermostat adjustment, element testing or gas repairs.
when to get help
- if marked unevenness continues, the oven does not heat or the fan makes an unusual noise, arrange service rather than adjusting or testing internal parts.
steps
- arrange the shelves while cold
use the cooking chart's shelf position for the dish. remove unused trays and avoid oversized trays that block space around the sides.
- compare the cooking result
select the recommended mode and preheat as instructed. centre the tray, avoid unnecessary door opening and rotate food only if the cooking guide calls for it.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
