how to check a main-oven door seal and match its hooks
a torn, loose or flattened main-oven seal is worth checking, but an unevenly closing door also needs attention. part 4055859005 is one continuous four-sided black rubber seal with metal retaining hooks.
on a double or duo oven, the smaller cavity can use a different seal; this supply is not a set for both. the checks here identify the seal and visible damage, not the old-hook release or a replacement procedure.
- repair type
- mechanical repair
- difficulty
- easy
scope: use the full model and pnc and follow the exact oven's accessible hook-held seal instructions. do not stretch the seal or force hooks into mismatched positions.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- cool and isolate the oven
switch off and disconnect power as the oven instructions require. let it cool fully before touching the seal.
- inspect the seal and closure
look for tears, flattened sections or hooks that are already loose. close the door gently and check whether it sits squarely. do not pull out hooks to investigate.
- match the main cavity and hooks
check the full model and pnc, the cavity, rubber profile and every visible hook position against the product information. oven width alone is not enough. do not stretch the rubber or force a hook into a different position.
- get the correct fitting method
obtain the exact oven's seal-removal and fitting instructions, or ask a suitable repairer to check it. this guide does not explain releasing the old hooks. after any correctly completed replacement, the hooks must be secure and the seal lie evenly without twists or bunching. get help if the door remains crooked.
think you can improve this guide? help us
