how to clean rangehood grease filters and check carbon-filter care
before cleaning rangehood filters, identify which are washable grease filters and which need separate carbon-filter care. cool and isolate the hood, support filters as you release them, and dry and latch permitted washable filters securely before use.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 15 min
scope: removable filters only. check whether each is washable, disposable or a type that can be regenerated.
tools and materials
- brush
when to get help
- stop for damaged mesh, an insecure latch or a filter you cannot reach safely, and seek repair advice. never wash or bake an unidentified carbon filter. persistent smells or poor extraction after maintenance need assessment.
steps
- remove the filter safely
switch off, let the hood cool and isolate power. support the filter as you release its latch, following the manual.
- wash only washable mesh
if permitted for that filter, soak the mesh in warm soapy water, brush gently and rinse. let it dry fully before refitting. do not assume it can go in the dishwasher.
- treat carbon filters separately
if the hood recirculates air, check its carbon filter. replace a saturated disposable type; regenerate only a type with explicit instructions for that process. refit filters securely and check every latch.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
related problems
- why is condensation collecting on my rangehood?steam can condense on a cool hood, including above induction cooking. check fan timing, speed and grease-filter care before an installation assessment.
- why do cooking smells linger when i use my rangehood?check whether the hood recirculates and which filters it uses. a clean-looking grease mesh does not establish that a carbon filter is effective.
- why does my rangehood extraction feel weak?check fan speed and grease-filter condition. continued poor capture may involve ducting or installation, not just the motor.
