how to check grease and carbon filters in a Westinghouse rangehood
identify whether the Westinghouse rangehood is ducted or recirculating before choosing filter care. clean and dry washable metal filters with power isolated; replace a spent carbon filter only with the type specified for a recirculating model.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 15 min
scope: carbon-filter advice applies to recirculating Westinghouse rangehoods.
tools and materials
- brush
when to get help
- a fan that does not run or continued poor airflow after filter care needs service. leave duct and electrical work to a qualified person.
steps
- check how the hood is set up
use the installation paperwork or model guide to establish whether air is ducted outside or returned to the kitchen. do not dismantle ducting to find out.
- check any carbon filter
on a recirculating model, replace a spent carbon filter with the type specified for that hood.
- clean the washable metal filter
with the hood off, power safely isolated and the filter cool, soak the washable metal filter in warm soapy water for about ten minutes, then brush and rinse. avoid harsh chemicals that can tarnish the mesh. dry it fully before refitting.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
