why is my Garmin Forerunner 570 smartwatch not charging?
dirty or damp contacts or an incorrectly seated cable can leave a Garmin Forerunner 570 without a charging indication. check those connections before assuming a failed battery.
model scope: Garmin Forerunner 570 series, manual version 6.
the linked charging guide follows the series' version 6 manual. disconnect before cleaning the contacts and surrounding area by its documented method, and dry thoroughly. do not scrape pins or use harsh cleaners or solvents.
gently seat the matching watch-end connector and use the power source specified by the manual. look for the battery-charge level on the display. more pressure, a modified cable or an unverified reset sequence is not an appropriate next check.
stop charging for unusual heat, swelling, corrosion damage or broken pins. if the correct connection still gives no indication, contact Garmin. do not open the watch, replace its sealed battery or apply another watch's connector or full-charge time.
possible causes
- the charging contacts need cleaning or drying.
- the cable is not seated properly at the watch.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
