how to pair a supported Samsung smart remote with a tv or smart monitor
for supported australian Samsung smart remote and device combinations using return and play/pause, confirm compatibility and charge first if needed. point at the device's remote sensor, hold the documented buttons together for at least three seconds and wait for the connection message.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: australian Samsung smart remote and device combinations using return and play/pause. the uk video is a tv example.
when to get help
- do not apply this sequence to an unconfirmed aftermarket remote or try arbitrary factory-reset button combinations. a failed connection needs the correct device and remote instructions, not more guessed sequences.
steps
- check the remote and device
confirm the remote reference is supported by the tv or monitor. charge it first if it is rechargeable.
- start pairing
point the remote at the device's remote sensor. where the documented buttons are return and play/pause, hold them together for at least three seconds.
- wait for confirmation
look for the device's connection message. if the buttons differ or no message appears, use that model's manual or contact Samsung support.
videos
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
related problems
- why is my Samsung M70D monitor's original SolarCell remote not responding?the 2024 LS32DM700UEXXS example needs USB-C recovery when completely flat. charge first, then check its supported pairing method.
- why does my Samsung smart remote have power but not control the tv?for supported australian combinations with return and play/pause, confirm compatibility and pairing. button presses alone do not confirm a connection.
