how to check a changing time estimate on an AEG ProSense washing machine
on AEG washing machines with ProSense and the described kg display, allow the initial load-sensing stage to finish. a revised time is not itself a timer fault; check that the wash continues and record any separate warning or stoppage.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: AEG washing machines fitted with ProSense and the described kg display.
when to get help
- do not dismiss leakage, burning smells, repeated stopping or a locked water-filled drum as load sensing. do not force the door or bypass the lock.
steps
- allow the weighing stage
after start, the drum can move briefly while kg flashes. let that stage finish; the first time displayed is an estimate, not a fixed countdown.
- look for normal progress
a revised duration alone does not call for a timer or control-board replacement. if the machine stops progressing, retains water or displays a warning, note the programme and full model for further help.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
