what does E10 mean on my Electrolux front-loading washer or washer-dryer?
E10 indicates a filling problem on the Electrolux front-loading washers and washer-dryers covered by the E10/E11 guidance. an interrupted supply or restricted inlet path needs checking before assuming the valve has failed.
model scope: Electrolux front-loading washers and washer-dryers covered by the E10/E11 filling guidance.
check whether water never enters or starts and then stops, and whether the supply tap is open. look for a kink in the safely visible inlet hose without pulling out the connected machine.
inlet-screen or hose-connection cleaning is appropriate only where the exact model's manual permits it. isolate power and close the tap before that maintenance; leave inaccessible connections alone. the linked water-supply guide covers these preliminary checks.
if E10 returns with water available, arrange service. the linked valve-and-flowmeter assessment is conditional on diagnosis and the product's exact fitment, mounting and connector requirements. E10 does not prove that the 1324416120 assembly is required. a leak or damaged connection means close the tap and stop.
possible causes
- the water supply has been interrupted
- the inlet hose or its filter screen is restricted
solutions
- how to check water supply after an Electrolux washer shows E10 or E11check the tap and visible inlet hose on the front-loading machines covered by this guidance. inlet-screen cleaning depends on safe access and the exact manual.
- how to check a washer inlet valve with an integrated flowmetercheck the visible supply before arranging valve and flow-detection tests. the two-way Bitron assembly must match the original mounting and keyed plugs.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
