why is water left in my washing machine after a wash?
water left in the drum after a wash can mean draining has not finished, but first check whether rinse-hold was selected. note whether the machine also stopped before spinning.
follow the drainage checks in the washer's own manual. a kink in the visible hose or an obstruction at an owner-accessible filter needs checking before a pump is condemned. do not move the connected machine to inspect hidden hoses, force the door or open a hot, water-filled filter housing.
if those checks do not explain the retained water, the linked drain-pump guide explains what to record for a technician. a pump fault must be confirmed before ordering. the linked Askoll M231 XP / S3041 offer is a motor, not a complete filter or housing; a damaged housing needs separate attention.
first checks
- check the selected function
read the cycle display and manual to see whether rinse-hold is keeping water in the drum.
- look without dismantling
from a dry position, check the already-visible drain hose for a kink. let the water cool before any maintenance the manual permits.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
