how to check a washing machine drain-pump problem
water left in the drum does not by itself mean the pump motor has failed. check the accessible drain path first; a technician can then assess the motor and housing.
the linked Askoll M231 XP / S3041 is a motor-only supply with rear screw mounting and two spade terminals. reuse requires a sound matching plastic housing and filter body.
- repair type
- technician service
- difficulty
- moderate
scope: owner checks are limited to the manual's accessible maintenance. Fisher & Paykel top-loader use is not necessarily a direct swap: documented cases needed bracket, spacer and connector work. Bosch and Zanussi applications require an old-part/reference match.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- note what stopped
note whether water remains and the machine stopped before spinning. check whether rinse hold was selected. don't force the door open.
- disconnect safely
switch off and unplug only from a dry, accessible point, then turn off the tap. let the water cool before any maintenance allowed by the washer manual.
- check the drain path
look for a kink in the visible hose without moving the washer. follow only the manual's owner-accessible filter checks. don't open a hot, water-filled machine or force a stuck cap.
- arrange a pump check
ask the technician to check for blockages and inspect the pump. use the product page and have them compare the old motor label, mounting and terminals before any replacement.
- check after repair
have the technician confirm that the pump drains without leaking before using the washer normally.
think you can improve this guide? help us
parts for this solution
Drain Pump Motor for ASKO Washing Machines - Genuine Askoll M231 XP
Drain Pump Motor for Fisher & Paykel Washing Machines - Genuine Askoll H0022150033660401G
Drain Pump Motor for Selected Haier Appliances - Genuine Askoll M231 XP
Drain Pump Motor for LG Washing Machines - Genuine Askoll EAU61383505
Drain Pump Motor for Samsung Washing Machines - Genuine Askoll DC31-00181A
Drain Pump Motor for Selected Appliances - Genuine Askoll M231 XP
related problems
- what should i check when my Electrolux washing machine shows E20?E20 concerns drainage on Electrolux front loaders. check permitted filter care and visible drain restrictions before assuming the pump motor needs replacing.
- what does E1 mean on my Haier HWF75AW1 washing machine?on this exact Haier model, E1 means emptying has not completed within six minutes. check the permitted filter and drain path before a pump diagnosis.
- what should i check when my LG front-loading washing machine shows OE?OE concerns drainage on the covered LG front loaders. check the permitted filter and visible drain hose before assuming a motor fault.
- why is water left in my washing machine after a wash?check whether rinse-hold is selected and whether the visible drain path is restricted before suspecting the pump.
- what does 5C mean on my Samsung WW75J54E0IW/SA washing machine?this model's 5C warning concerns drainage. cool and isolate before the documented emergency-drain and pump-filter care.
- what should i check when my Samsung washing machine shows 5E?check the visible hose and exact model's safe draining instructions. front-loader filter care is not permission to open an internal top-loader pump.
- why does my Simpson SWT951 washing machine show E20?for the SWT951 top loader, E20 is a drainage warning. check the paused machine's visible hose and leave internal pump access to service.
