how to identify a single-opening Samsung washer seal
confirm the door-area leak before choosing a seal. DC64-03197A-style supply is one grey rubber bellows with a single pipe opening, moulded locating ear and front and rear clamp grooves.
the nozzle assembly and retaining clamps are not included and must be checked separately.
- repair type
- technician service
- difficulty
- moderate
scope: panel access and spring-clamp handling vary by model. the saved fitting note requires correct orientation/hose position, both lips evenly seated and secure clamps; a trapped fold or loose clamp can leak. leave this internal work to the technician.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- turn the washer off
stop the washer, close the tap and unplug only from a dry, safely accessible point. when it is cool, unplugged and empty, look for damage or debris where the rubber meets the door glass.
- record the seal type
check the complete model code and revision on the product page and compare the old seal's single-opening shape. photograph the seal and full model label without removing clamps or running another cycle to reproduce the leak.
- arrange the repair
have a technician find the leak and fit the right seal. they should check the separate nozzle, clamp condition and seal seating, then confirm normal door closure and no leaks after reassembly.
think you can improve this guide? help us
