how to replace an accessible washer drain filter
clean a blocked but intact removable drain filter; replace a cracked cap, broken grip, missing basket or failed sealing ring. the 00605010 / 00647920-style supply includes the cap, basket and fitted black ring, not the pump motor or housing.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 15 min
scope: owner access must be permitted by the manual. cool and safely drain under its emergency-drain instructions first. for WAP28482AU/01, check handle clearance at the flap; never force a stuck cap or main door.
tools and materials
- shallow tray
- towels
steps
- check the manual and model
check that the washer manual allows owner access to the removable filter. check the full model revision on the product page before choosing a replacement.
- drain safely
let the water cool, unplug the washer and turn off the tap. follow the exact model's emergency-drain instructions with towels and a shallow container before removing the filter. do not force the main door or handle sharp debris blindly.
- compare the old filter
only after safe draining, remove the old cap if it comes out freely. compare its thread, basket, grip and sealing-ring position with the replacement.
- fit the filter
clean the area where the filter sits. fit the new cap and basket evenly by hand without force.
- check the seal
check that the ring sits properly and the service flap closes without force. leave the washer off and request help with photos if the cap will not seat, the flap will not close or water leaks at the filter.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
parts for this solution
related problems
- what should i check when my Bosch washing machine shows E:18?cool and safely drain the washer using its manual before filter care. E:18 does not mean a damaged cap or failed pump is confirmed.
- what should i do if my washer drain-filter cap or basket is damaged?check physical damage separately from debris, and do not force a cap that will not seat or a service flap that will not close.
- what does F:18 mean on my Siemens washing machine?check the permitted draining and filter method. a blocked drain does not mean the removable filter cap itself needs replacement.
