how to check rinse hold and no spin on a Westinghouse washing machine
on Westinghouse front loaders fitted with rinse hold or no spin, check the selected finish option before assuming a spin fault. use the permitted drain or spin finish and redistribute the load only after the drum stops and the door unlocks.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: Westinghouse front loaders fitted with rinse hold or no spin.
when to get help
- stop for leakage, water that will not drain or violent movement. do not bypass the lock or repeatedly restart an unsuccessful spin.
steps
- read the selected option
check for rinse hold or no spin. rinse hold keeps the final rinse water; no spin drains without spinning. select the drain or spin finish allowed by your model's controls.
- balance the load safely
if clothes remain very wet, pause and wait for the drum to stop and the lock to release before redistributing. a very small load can also be difficult to balance. retry a suitable spin once.
- keep drainage trouble separate
if water will not drain or spin still fails, arrange further checking. do not force the door or unscrew a filter while hot water remains in the drum.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
