Door Seal for Bosch WAP28380AU/01 Front Load Washing Machine
- repair difficulty:moderate
- estimated repair time:~ 75 min
this part fits to Bosch WAP28380AU/01 Front Load Washing Machine.choose another model
estimated 2-4 business daysthis part fits to Bosch WAP28380AU/01 Front Load Washing Machine.choose another model
estimated 2-4 business days- appliance
- Bosch WAP28380AU/01 Front Load Washing Machine
- fitment
- verified
- note
- grey epdm seal with one open tube and no lighting nozzle only.
- usage
- type
- quality aftermarket replacement, mostly sourced from factories that work with name brands.
- country of origin
- Turkiye
- compatible brand
- appliance type
- part type
- condition
- brand new in box
- one light grey epdm seal supplied; clamps and retaining wires are not included
- one open tube, without a lighting nozzle
- replaces matching 00680768 / 00772658 seals
- confirm material suitability if the original requires grease-resistant silicone
how to make sure it fits?
description
this is a door seal for selected bosch front-load washing machines. it seals against the door glass. one light grey EPDM seal is supplied, clear-wrapped and boxed, with one open tube and no lighting nozzle. approximate diameters are 29 cm front inside, 33.5 cm front outside and 41 cm rear outside.
replace it when damaged rubber is diagnosed as the source of a door leak. this is the 00680768 / 00772658 style in EPDM rubber; confirm suitability where the original requires grease-resistant silicone. E23 / F23 indicate leak protection on applicable bosch models; arrange service if that protection has activated.
repair advice
DIY warning
Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.
Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.
i agree, show repair advice
- repair time~ 75 min
- repair difficultymoderate
repair time and tools
- Suitable screwdrivers or Torx bits for the appliance, retaining-band pliers if required, torch, towels and a shallow tray.
fitting notes
Compare the complete seal and its connections
Match the one open tube, its position, all other ports or spray outlets, drain openings, fixing points and both seating lips against the old seal. A closed moulded feature is not an instruction to drill a new port. Different versions can look similar, so the WAS, WAK or WAT family name alone is not enough.
Check condition before fitting
Unwrap and inspect the seal before fitting it. If you are unsure about marks, damage or the match to your old seal, contact us with clear photos before installation.
Keep grease-resistant versions separate
Some seals in the 00680769 / 00772653 family use grease-resistant silicone. This seal is light grey EPDM. Check the original material requirement and complete connection layout before ordering.
Copy the complete E-Nr
Use the complete model code on the appliance label, including the slash and final revision digits. The Bosch label pictured is an example of how to read the code, not a compatible-model claim.
error codes
E23 / F23 - leak-protection warning on applicable Bosch models E23 - leak or water-in-base warning on applicable Siemens models
These warnings do not identify a failed door seal. Turn off the water supply and follow your exact model manual; Bosch support calls for service when leak protection has activated. WAK24160AU lists E:23 for water in the base. Do not assume every listed model displays the same code or that replacing this seal will clear it.
Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.
specifications
specifications
- Authenticity
- Aftermarket
- Colour
- Light grey
- Front inside diameter
- Approx. 29 cm
- Front outside diameter
- Approx. 33.5 cm
- Included
- One door seal
- Lighting nozzle
- Not present
- Material
- EPDM rubber
- Mounting
- Front and tub-side seating lips with retaining bands
- Not included
- Retaining clamps and wires
- Open connection
- One open tube
- Packing
- Clear-wrapped and boxed
- Part style
- Front load washing machine door boot seal
- Rear outside diameter
- Approx. 41 cm
- Resistance type
- Suds-resistant; not a grease-resistant silicone equivalent
- Part references
- 00680768, 00772658, 772658, 20007273, 00682843
- Our catalogue reference
- BOZ1000118
- Repair difficulty
- moderate
- Repair time
- ~ 75 min
- SKU
- GSK009BO
- Country of origin
- Turkiye
- In the pack
- 1 x light grey EPDM door seal with one open tube, clear-wrapped and boxed. Retaining clamps and wires are not included.
- Units in pack
- 1
- Shipping weight
- 1 kg
looking to buy more than 20? use our wholesale rfq form.
feedback
- 5.0/5marketplace
Quick delivery, part as described, got my washing machine back on its feet!
for Bosch Washer Door Seal 00772658 WAS24460AU/03 WAS28461AU/01 Fix Leak
