Drain Pump Motor for Fisher & Paykel WH8560J1 8.5kg QuickSmart Washer - Genuine Askoll

repair difficulty:moderate
estimated repair time:~ 25 min

Pump motor body and terminals

in stock and ready to go

AU $49 | delivery 2-4 days

AU $49

buy now, pay later available

In Stock

fit or refund12 month warranty

this part fits to Fisher & Paykel WH8560J1 8.5kg QuickSmart Washer.choose another model

quantity

dispatch: next business day from Sydney, NSW

shipping: tracked,

estimated 2-4 business days

returns: 30-day change-of-mind returns.

payments:

fit or refund12 month warranty

this part fits to Fisher & Paykel WH8560J1 8.5kg QuickSmart Washer.choose another model

dispatch: next business day from Sydney, NSW

shipping: tracked,

estimated 2-4 business days

returns: 30-day change-of-mind returns.

returns conditions

30 days from delivery, if you change your mind.
unused and in its original packaging, with factory labels and markings intact.
check fitment first: installed parts cannot be returned.
pcbs and control boards: once the anti-static seal is broken, the board cannot be returned.
return postage paid by the buyer, unless the part was sent in error.
faulty or not as described? your Australian Consumer Law rights apply and are not limited by these conditions.

payments:

feedback: 4,365 positive (4,391 total).

AU $49

In Stockposted in 1 business day

qty

appliance: Fisher & Paykel WH8560J1 8.5kg QuickSmart Washer
fitment: verified
usage: household
type
compatible brand: Fisher & Paykel
appliance type: washing machines
part type: pumps
condition: brand new in box

one genuine askoll M231 XP / S3041 motor supplied
motor only; reuse a sound matching housing, which is not included
rear screw mounting with a five-hole body and two spade terminals
H0022150033660401G identifies the complete pump; this offer supplies its motor only
top-loader applications may need bracket, spacer and connector alterations

how to make sure it fits?

find your model and product code
copy the full model and product code, including ending letters, from the washer label. the fisher & paykel top-loader example is under the lid; positions vary and this is not a front-loader location guide.
check your model and pump version
check that both your full model and product code are listed for this part before ordering, including any revision letter. match any stated fitting conditions too. H0022150033660401G identifies the complete pump; this is its motor only for a sound matching housing. top-loader applications may need bracket trimming, a rotor-clearance spacer and connector changes; ask us to check that application before ordering.
not sure? ask us
if either number isn't listed or you're unsure, send the whole label and, if already accessible, photos of the old motor and connections. if you cannot find the label, send a washer photo or the manual.

description

this is a drain pump motor for selected fisher & paykel washing machines, mainly front loaders. it drives wastewater removal. one genuine askoll M231 XP / S3041 motor is supplied; reuse the matching plastic housing if it is clean and undamaged. H0022150033660401G refers to the complete pump, while this offer supplies its motor.

37 / E37 can indicate a drain or blocked-filter fault on matching front-loader setups; replace the motor when it is diagnosed as faulty. the motor has two spade terminals. top-loader applications can require bracket trimming, a rotor-clearance spacer and connector work.

repair advice

DIY warning

Working on appliances can involve mains electricity, water and moving parts. Always disconnect power and water before you start. In Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. Everything on this site is guidance only, and any repair you carry out is at your own risk. If you are not confident, please use a qualified technician.

Appliance repairs can involve electricity, water and moving parts. In Australia, gas work needs a licensed gasfitter and fixed electrical work needs a licensed electrician. Only proceed if you are confident. If not, use a qualified technician.

i agree, show repair advice

repair time~ 25 min
repair difficultymoderate

repair time and tools

Phillips screwdriver
Pliers
Towels or shallow tray

fitting notes

Motor-only replacement

H0022150033660401G is a complete pump reference. This listing supplies the motor only; the plastic housing is not included. Compare the old motor label, mounting and electrical connectors with our photos.

Fisher & Paykel top loaders

I mainly sell this Askoll motor for selected Fisher & Paykel front loaders. A WA8560P1 top-loader repair did get running with this motor, but it was not a straight swap. It needed bracket trimming, a small spacer for rotor clearance, and connector changes for the wider spade terminals. For F&P top-loader use, send photos first.

error codes

Drain codes: 37 / E37 on matching F&P front-loader pump setups can be a drain or pump-filter-blocked fault. This motor helps when the drain pump motor has failed.

Before replacing: Clear water, check the filter and compare the old pump. On top loaders, also check bracket clearance, rotor clearance and terminal spacing before ordering.

Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.

think you can improve this? help us

specifications

Authenticity: Genuine - in original packaging
Electrical Rating: 220-240 V AC, 40 W, 50 Hz
Mounting Style: Rear screw-on body, 5 mounting holes
Supply: Motor body only, no pump housing or cover
Terminal Type: 6.4 mm spade terminals
Part references: H0022150033660401G, M231 XP, S3041, 429640P, 424793P, 421820P, M224XP, 50245293001, Plaset 50700, Plaset 50733
Our catalogue reference: BOZ1000001
Repair difficulty: moderate
Repair time: ~ 25 min
SKU: BOZ1000001-FP
EAN: 9309003709011
Country of origin: China
Origin note: Manufactured by Askoll, an appliance motor and pump manufacturer.
In the pack: 1 x genuine Askoll drain pump motor
Units in pack: 1
Shipping weight: 0.5 kg
Dimensions(W × H × L): 15 × 12 × 12 cm (packaged)

looking to buy more than 20? use our wholesale rfq form.

product video

feedback

trademarks and part references. Brand names, model numbers, manufacturer part numbers (MPNs) and product codes shown on this site are the property of their respective owners and are used solely to identify the appliances that a part fits. Their use does not imply any affiliation with, endorsement by, or sponsorship from the original manufacturer. Big Oz Lebowski Appliance Spares and Components (Big Oz Lebowski Pty Ltd, ABN: 40 678 658 127) is an independent spare parts supplier and is not affiliated with any appliance brand listed. see our copyright and trademark policy.

content protection. All listings, descriptions, photography, compatibility data and structured part information on this site are original works of Big Oz Lebowski Appliance Spares and Components (Big Oz Lebowski Pty Ltd, ABN: 40 678 658 127) and are protected by copyright under the Copyright Act 1968 (Cth). Automated scraping, crawling, copying or re-publication of any content from this site is prohibited without prior written consent. Access is logged and unauthorised use will be pursued under our Terms of Use, which include liquidated damages payable per listing copied. Operators of scraping tools and the parties commissioning them may both be held liable. see our copyright and trademark policy and terms of use.

our values

our values

Drain Pump Motor for Fisher & Paykel WH8560J1 8.5kg QuickSmart Washer - Genuine Askoll

returns conditions

how to make sure it fits?