should i clean or replace my DishDrawer drain filter?
food caught in an intact DishDrawer drain filter may only need cleaning. a missing filter, cracked frame or torn mesh needs replacement rather than reshaping.
switch off, disconnect power and let the drawer cool before the care checks allowed by its manual. watch for sharp debris. the small drain filter is separate from the broad filter plate; a problem with one does not establish that both need replacing.
the linked guide concerns the 524828 kidney-shaped filter, not a circular twist-lock format. compare the same side of the old filter and the product photograph, because viewing underneath reverses the apparent curve. one filter serves one drawer; replacing both drawers requires two. if water remains after cleaning and correct refitting, continue model-specific drainage checks instead of assuming another filter will cure it.
first checks
- inspect the cool filter
check visible frame and mesh condition, keeping fingers away from sharp debris. follow only the manual's removal and cleaning method.
solutions
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
