how to clean or replace a kidney-shaped DishDrawer drain filter
rinse food from an intact kidney-shaped drain filter; replace one that is missing or has a cracked frame or damaged mesh. 524828 is the small grey-framed metal-mesh filter, separate from the broad filter plate.
one filter serves one drawer, so a double unit needs two only if both filters are being replaced.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: compare the same face and orientation of the old filter. DS605/DD605 instructions show basket-flap access and refitting flush with the plate; other models must follow their own care guide. watch for sharp debris.
steps
- disconnect and cool
switch off, disconnect power and let the drawer cool. inspect the accessible filter for food, cracks or torn mesh, watching for sharp debris.
- check the filter shape
check the product page and that the drawer has a kidney-shaped recess, not a circular twist-lock filter. compare the same side of the old filter and photo; looking from underneath reverses the apparent curve.
- clean or change the filter
follow the model's instructions to lift it out without disturbing the motor or forcing any part. rinse loose food under running water. replace damaged frames or mesh rather than trying to reshape them.
- refit the filter
seat it securely in its recess, flush with the plate where the manual requires. if water remains after cleaning, arrange further drainage checks.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
