how to clean a DishDrawer filter, filter plate and spray arm

clean trapped food from the removable filter, filter plate and spray arm in a DishDrawer, then refit them securely so the arm turns freely. use the model's release method: older locking-ring plates and newer lift-out plates differ, and this task leaves the motor rotor in place.

repair type
owner care
difficulty
moderate
hands-on time
~ 15 min

scope: removable filters, plate, spray arm and racks only. leave the motor rotor in place.

when to get help

  • if the filter will not seat, you find sharp debris, or knocking or poor washing continues after cleaning and reloading, arrange service. stop using the drawer if it leaks or excess water remains.

steps

  1. clear the drawer

    stop the wash normally, let the drawer cool and switch off. move utensils out of the spray-arm path. remove the rack only by the method in your manual.

  2. rinse the removable pieces

    follow the manual to release the drain filter and spray arm, then rinse away food and clear the spray holes. take care around sharp plate edges. older locking-ring plates and newer lift-out plates use different release methods.

  3. refit and check movement

    align and secure the filter plate and filter using the manual's marks. refit the spray arm and rack, checking that the arm turns freely. do not run the drawer with any of these pieces missing.

diy warning

working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.

think you can improve this guide? help us

related problems

right to repair manifesto

You bought it, you own it, and you should be able to fix it.Australian households deserve access to genuine spare parts,clear part numbers and honest fitment information,without replacing an entire appliancewhen something small breaks.

We do our best to make spare parts easy to find.

  • in stock only: if it is listed it is on our shelf
  • honest labels: if we say genuine it arrives with factory labels and markings
  • we pack and post from Alexandria NSW
  • fit or refund guarantee on most products

need a hand?

got a question about a part or an order? drop us a message and we'll get back to you as soon as we can.

customer service

need a hand?

got a question about a part or an order? drop us a message and we'll get back to you as soon as we can.

customer service