how to prepare a tumble dryer load and check moisture-sensor care
for more even tumble drying, separate heavy and light fabrics, stay within the chosen programme's capacity and select a suitable dryness level. clean moisture-sensor strips only if the manual identifies them and provides an owner cleaning method.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 10 min
scope: sensor cleaning only where the manual provides a cleaning method.
when to get help
- if suitable loads still finish damp after filter care and any permitted sensor cleaning, arrange service and describe the programme, load and result.
steps
- separate heavy and light fabrics
spin washable items at a speed suitable for the fabric first. dry heavy towels separately from light clothing and stay within the chosen programme's load limit.
- choose the drying result
select the programme and dryness level that suit the laundry. clear the lint filters before comparing the result with another load.
- clean sensor strips if instructed
if the manual shows moisture-sensor strips for cleaning, switch off, isolate power and let the dryer cool. use only the specified cloth and cleaner; do not scrub them with an abrasive or open panels to find them.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
related problems
- why does my dryer finish while clothes are still damp?check the programme, dryness setting and mixed fabric weights. filter care and model-permitted sensor cleaning may help before fault assessment.
- why is my dryer taking longer than usual to dry clothes?check starting wetness, load size and airflow. condenser and secondary-filter maintenance must match the dryer design.
