how to empty a tumble dryer water tank and check a visible drain hose
stop the tumble dryer as its manual directs before emptying and reseating the water tank. if the dryer uses direct drainage, switch it off and check only visible hose for kinks or trapping, leaving concealed connections assembled.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: water tank or visible external drain hose; no internal pump access.
when to get help
- if water leaks or the reminder returns with the tank empty and seated and the visible hose clear, stop using the dryer and arrange service.
steps
- empty and reseat the tank
stop the dryer as instructed before removing the tank; do not remove it mid-cycle if the manual prohibits this. keep it level as you withdraw it, empty it and slide it fully back into place.
- check a direct-drain hose
if your dryer drains through a hose, switch it off and look along the visible hose for a kink or trapping. keep the outlet arranged as the installation guide specifies. do not disconnect concealed fittings.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
