how to clear trapped air from a Fisher & Paykel fridge water dispenser
for the Fisher & Paykel ice & water fridge models named in this guide, dispense 3 L intermittently to clear trapped air. if the filter is new, also complete its separate commissioning flush; the 3 L step is not a substitute for that procedure.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 10 min
scope: Fisher & Paykel ice & water E402B, E442B, E522B, RF522W, RF522A, RF610A and RF540A.
tools and materials
- suitable water container
when to get help
- close the water supply if safely accessible and get help for continuing leakage, damaged tubing or water near electrical fittings.
steps
- check when the drips began
note whether the problem started after installation or a filter change. look only at safely visible supply tubing for a leak or kink; do not pull out a plumbed-in fridge.
- flush the dispenser intermittently
for trapped air on these models, the manual specifies dispensing 3 L of water, stopping intermittently. use a suitable container and empty the drip shelf before it overflows.
- finish the filter's own flushing sequence
a new filter needs the separate commissioning sequence in the appliance manual and filter instructions. the 3 L air-clearing step alone is not a complete new-filter flush.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
