how to replace matching fridge drawer runners
replace a worn or bent matching runner only after checking the drawer, clips and supports. the linked choices are 836703 left, 836702 right, or a pair, viewed facing the appliance.
they replace an existing arrangement; they do not convert a tray without runners or substitute for a different drawer's main slides.
- repair type
- mechanical repair
- difficulty
- moderate
- hands-on time
- ~ 45 min
scope: RF440TRPW6 25010-A and RF440TRPX6 25575-A use different 305-series rails, 836700 right/836701 left. follow the exact drawer-release method, keep rail grease in place and do not add lubricant or alter mounts.
tools and materials
- model-appropriate drivers
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- empty and check the drawer
empty the drawer and compare both visible runners, clips and supports. do not force it or remove a fixed bin. check the old rail numbers, mounts and product-code restrictions; left and right are viewed facing the fridge.
- unplug the fridge
unplug the fridge. follow the exact model's instructions to support and remove only a drawer intended to be removable.
- change the runners
follow the documented release and fastening method, using a driver only for the specified fixings. reuse correct undamaged clips and screws. do not alter mounts, force clips, wash grease out of the rails or add lubricant.
- refit the empty drawer
follow the model's instructions and check that both sides engage and slide evenly. ask a repairer if the release or attachment is unclear. stop if the drawer tilts or catches.
think you can improve this guide? help us
