how to check a smartwatch charging connection
if a smartwatch will not charge, disconnect and inspect its cable and connection without bending or scraping pins. clean any exposed contacts only by the watch's care method, dry them fully and reconnect the specified cable and power source gently before checking the charge indication.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
when to get help
- stop charging for unusual heat, swelling, corrosion damage or broken pins. if the watch still will not charge, contact its manufacturer. do not open a sealed battery or attempt internal repairs.
steps
- disconnect and inspect
look for damage to the cable and watch connection. do not press, bend or scrape pins.
- clean and dry contacts if fitted
use only the watch's documented care method. keep liquid out of openings and let the contacts dry before charging. do not use a solvent or cleaner just because it is recommended for another watch.
- reconnect the correct cable
use the cable and power source specified for the watch. seat the connection gently and look for its charging indication; do not force a connector or try an unconfirmed reset sequence.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
