how to check recovery refilling on a Fisher & Paykel washing machine
for the Fisher & Paykel WashSmart and QuickSmart models named in this guide, a refill, agitation and another spin attempt can be out-of-balance recovery. wait for the bowl to stop and lid to unlock before redistributing the load or reviewing the recovery preference.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: Fisher & Paykel WA60T56G, WA55T56G, MW60, MW513, WA8056G and WA8056M.
when to get help
- get help for persistent banging after balancing, leakage or water that keeps entering outside the recovery sequence. never bypass the lid lock.
steps
- recognise the recovery sequence
a refill followed by agitation and another spin attempt can be automatic out-of-balance recovery. compare that sequence with the recovery option in your washer's guide.
- redistribute only after it stops
pause the washer and wait until the bowl is stationary and the lid unlocks. spread the load more evenly. if imbalance keeps returning, check that the washer does not rock and the load suits the selected water level.
- choose recovery deliberately
these models offer automatic recovery or a stop-for-manual-redistribution option. use the exact guide to change that preference; changing it will not repair a mechanical fault.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
