how to clean the in-drum drain filter on a Simpson SWF washing machine
for Simpson SWF85561, SWF85661 and SWF10761 washers, open the door only after the drum is safely empty, cool and normally unlocked. unplug before aligning the in-drum filter cover with the seal arrow, cleaning and clicking the filter back into place.
- repair type
- owner care
- difficulty
- moderate
- hands-on time
- ~ 15 min
scope: Simpson SWF85561, SWF85661 and SWF10761 only; cool, safely emptied drum and normally released door.
when to get help
- stop for retained hot water, sharp objects, a locked door or a cover/filter that will not release or reseat. persistent drainage failure needs service.
steps
- make sure opening the door is safe
if water reaches the door opening, is hot or the door stays locked, get help with drainage first. once safely empty and cool, set the selector to off and unplug.
- align and clean the in-drum filter
open the door and turn the stationary drum until the filter cover lines up with the arrow on the seal. press the cover's special hook and rotate the cover upwards, then hold the filter and lift it out. rinse it under a tap and remove accessible lint.
- refit the filter correctly
return the filter as shown in the model guide. its indicator must be visible and it must click into place. secure the cover before use; do not force a stuck catch.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
