how to check a top-loader's cold-water inlet valve
check the cold tap and visible hose first, then describe the filling pattern or leak to a technician. a failed valve is one possible cause, not a conclusion from slow filling alone.
140000916035 is a triple cold-water inlet assembly supplied with three black outlet seals. the hot-water valve and inlet hoses are separate.
- repair type
- technician service
- difficulty
- moderate
scope: internal repairs belong to service personnel. match the full model, suffix and product number; the supplied valve uses 240 V ac coils, blade terminals and a 3/4-inch bsp inlet.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
i agree, show repair advice
steps
- check the cold supply
check the cold tap and visible hose without pulling the washer out or disconnecting a hose to test it. note the cycle and whether one or both supplies are affected.
- stop any leak
stop using a leaking washer. unplug only from a dry, safely accessible point and close both taps.
- arrange a valve check
give the technician the filling details and any visible leak. check the full model, suffix and product number on the product page. have service personnel confirm the valve and outlet seals before any fitting.
- check after repair
the washer must fill under control without leaking. leave it off if either problem remains.
think you can improve this guide? help us
parts for this solution
related problems
- why is cold water filling my top loader slowly?check the accessible cold supply and note any leak before having the triple cold-water valve assessed.
- why does my Simpson top-loading washing machine show E10?for the eight documented models, E10 can concern slow filling or water loss during washing. check both supplies and the visible drain arrangement.
- why does my Westinghouse top-loading washing machine show E10?on the four documented WWT models, E10 can concern filling or water loss. check both supplies and the drain arrangement before any valve diagnosis.
