how to check the normal eco rinse on a Speed Queen AWNE92 washer
on the Speed Queen AWNE92SN305AW01, normal eco uses a spray rinse for its main rinse. when using fabric softener with that cycle, select second rinse as specified; the rinse being cold does not by itself indicate a valve fault.
- repair type
- owner care
- difficulty
- easy
- hands-on time
- ~ 5 min
scope: Speed Queen AWNE92SN305AW01 only.
when to get help
- do not bypass the lid lock, force a soak by holding the lid open or transfer these settings to other Speed Queen or commercial-laundry models.
steps
- confirm the selected cycle
on this model, normal eco uses a spray rinse for its main rinse. the tub not filling for that stage alone does not establish a water-supply fault.
- match softener use to the rinse option
if using fabric softener with normal eco, select second rinse as the guide specifies. optional rinse water is cold; do not change a hot-water valve because the rinse is cold.
- keep the lid protection working
leave the lid closed during operation. if the washer also fails to fill during an ordinary wash stage, check the required taps and visible hose kinks, then arrange service if needed.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
think you can improve this guide? help us
