Plinth Foam Filters for Miele Dryers - 12551630, 2 Pack

• repair time~ 5 min
• repair difficultyeasy

repair time and tools

• No tools normally required. A soft cloth is useful for loose lint.

fitting notes

Use one filter and keep a spare

Fit one foam filter at a time. Reuse the matching handle and holder, and compare the shape and holes before fitting. Switch off and unplug the dryer, then follow the filter-access instructions for your model.

Cleaning and checking the foam

Follow the cleaning prompt and care instructions for your dryer. Rinse the foam gently, squeeze out water carefully and allow it to dry as instructed. Do not refit a dripping-wet filter. Replace foam that is torn, distorted, does not sit snugly or remains blocked after the recommended cleaning.

error codes

F66 / F 066: Miele identifies restricted airflow, including clogged fluff or plinth filters, in the referenced dryer instructions. Clean the filters as instructed and inspect the foam for damage or poor fit. A wet filter or blockage elsewhere can also cause the warning. Replace the foam when its condition calls for it; the code alone does not identify a failed filter. If the warning returns, follow the troubleshooting instructions for your model or seek service advice.

Fitting notes are provided for general guidance only. We are not responsible for damage caused by incorrect installation. Always do your own checks and take these notes with a grain of salt.

think you can improve this? help us