washer-dryer problems and troubleshooting
clothes left damp after drying are not the same as clothes left soaking after a wash. these guides cover drying behaviour and named model checks so you can record what happens before seeking help.
common problems4
- why does my Bosch WVH28490AU drip onto clothes when i open it after drying?a small end-of-dry drip after opening quickly differs from an active wash leak, pooling or drainage failure.
- why does my LG WD-1247RD or WD-1248RD keep tumbling after drying?intermittent tumbling without heat can be the completion phase; continued heating or a warning is different.
- why does my washer-dryer leave clothes damp after drying?the drying load may be smaller than the wash load. check fabric-suitable spin, the drying limit and the model's air or water requirements.
- why is my Samsung WD90H19AHSSA Bespoke AI combo drying slowly?check both lint-filter layers and complete drying before refitting. this is not the filter method for every Samsung combo.
common solutions4
- how to clean the lint filters on a Samsung WD90H19AHSSA washer-dryerseparate the inner and outer lint filters gently, remove lint and rinse them. dry both completely in the shade before reassembly after each drying load.
- how to end post-drying tumbling on an LG WD-1247RD or WD-1248RD washer-dryerafter drying has finished, use start/pause to end the documented unheated completion phase. wait for the drum to stop and normal door release.
- how to open a Bosch WVH28490AU washer-dryer after dryingwait for normal unlocking and open the door slowly. the small end-of-dry moisture described for this model does not explain wash leaks or pooling.
- how to prepare a washer-dryer load for dryingcheck the selected drying capacity before starting and split a wash load if needed. follow the model's distinct ventilation, water and filter requirements.
diy warning
working on appliances can involve mains electricity, water and moving parts. always disconnect power and water before you start. in Australia, gas work must be done by a licensed gasfitter, and fixed (hard-wired) electrical work by a licensed electrician. everything on this site is guidance only, and any repair you carry out is at your own risk. we are not responsible for any damage or injury caused by attempting a repair. if you are not confident, please use a qualified technician.
